About the Product
KAPEKSDET MS is a short delaynon-electric initiation system. It is used as an in-hole detonator at surface and underground mines, quarries and construction works.
Product Features
- It is a shock tube detonator assembly that is highly resistant to breaking and abrasion.
- It has 20 standard delay intervals.
- Coiled as figure 8 type for easy handling.
- Provides control on delay times, initiation control and excellent blasting performance.
- lnitiates the cap sensitive explosives safely without affecting the column charge in the hole.
- Not affected by radio frequencies and static electricity. Helps reducing the ground vibration and air blast levels.
- Does not allow tangles and knots, increases work efficiency by easy and fast connection.
Ignition Information
KAPEKSDET MS can be initiated with KAPEKSDET shock tube surface delay elements, electrical caps or any detonating cord with minimum 5gr/m or higher PETN. Care should be taken while carrying and using the detonators. Detonators should not be hold inside your palm of hand and should not be pointed towards your body. Never stretch the tube excessively which may break it. Otherwise an unintended detonation may occur. Shock tube should not be damaged during charging or stemming. Surface initiation tie-up design should be carefully carried out. Same delay period KAPEKSDET MS in-hole detonators should be used for all blastholes in a blast and depending on the application, different KAPEKSDET SD surface connectors should be used to control the firing sequence. When using with the detonating cord, connections should be made at right angles to avoid shrapnel effects.
Packaging Description
KAPEKSDET MS assemblies are coiled in figure 8 or figure O,packedin anti-static polyethylene bags and put into cardboard boxes. Each box is barcoded and each detonator has a serial number for traceability.
Dimensions and Quantity
| Lead Length(meter) | Quantity Per Box |
|---|---|
| 4 | 100 |
| 5 | 100 |
| 6 | 100 |
| 7 | 80 |
| 9 | 60 |
| 12 | 60 |
| 15 | 40 |
| 18 | 30 |
| 21 | 30 |
| 25 | 20 |
| 30 | 25 |
| 37 | 15 |
| 45 | 14 |
| Other lead lengths can be produced on demand. | |
Delay Timetable
| Number | Delay Time (ms) |
|---|---|
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 9 | |
| 9 | |
| 10 |
| Number | Delay Time (ms) |
|---|---|
| 11 | |
| 12 | |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 | |
| 20 |
Technical Specifications
| Detonating Cord Clip | Red connector clip |
|---|---|
| Shock Tube | Yellow with a white label indicating the delay time and delay number |
| Detonator | High strength (0.70 gr) PETN base charge (#8*) |
Shipping Information
| UN Name | Non – Electric Detonator |
|---|---|
| UN No | 0360 / IMDG:1.1 B |
| UN No | 0500 / IMDG:1.4 S |
Storage Conditions
It should be stored according to regulations (87/12028) in a dry and well-ventilated magazines and should not be exposed to direct sunlight.
×
